Old Documentation

You are browsing documentation for an old version of Tabulator. Consider upgrading your project to Tabulator 6.3

Table Layout

Overview
Table Height
Column Layout Modes
Responsive Column Layout
- Hide Columns
- Collapse Columns
Text Direction
Resizable Elements
Frozen Elements
- Frozen Columns
- Frozen Rows
Redrawing the table
Virtual DOM
Horizontal Virtual DOM
Empty Table Placeholder
Table Footer Element
Events

Overview

Tabulator has loads of different ways of customizing the layout the table, have a look through the next few sections to see how you can configure your tables to meet your use case.

Tabulator works most efficiently when the table has a fixed height, either defined in the CSS for the element or set using the height option in the table constructor, this can be set to any valid CSS value

var table = new Tabulator("#example-table", {
    height:"100%",
});

By setting the height on the table, you allow Tabulator's virtual DOM to optimize the tables memory and processor usage. It does this by only rendering the rows you see in the table (plus a few above and below the current view) and creates and destroys the rows as you scroll through the table.

This allows tabulator to handle thousands of rows with no overhead as it only processes the information it needs to display.

If a height is set on the table then it will display vertical scroll bars when the number of row exceeds the table height. If there are less rows than the height of the table then the background of the table will be visible.

Variable Height Tables

If you would rather that your table takes up as much space as is needed to show all the available rows, then simply don't specify a height on your table element or in your table constructor.

Without a height the table will keep expanding to fit the number of available rows and will never display a vertical scroll bar.

Slow Rendering: It is worth noting that if you are loading a lot of rows into your table without a height set then it may result is blocking of the browser and slow render speeds as it takes a lot of memory to draw 100's of rows onto the screen.

Maximum Table Height

With a variable table height you can set the maximum height of the table either defined in the max-height CSS property for the element or set it using the maxHeight option in the table constructor, this can be set to any valid CSS value

var table = new Tabulator("#example-table", {
    maxHeight:"100%", //do not let table get bigger than the height of its parent element
});

By setting this you can allow your table to expand to fit the data, but not overflow its parent element. When there are too many rows to fit in the available space, the vertical scroll bar will be shown. This has the added benefit of improving load times on larger tables

Minimum Table Height

With a variable table height you can set the minimum height of the table either defined in the min-height CSS property for the element or set it using the minHeight option in the table constructor, this can be set to any valid CSS value

var table = new Tabulator("#example-table", {
    minHeight:300, //do not let table get smaller than 300 px heigh
});

Advanced Options

There are many scenarios in which you many need to tweak the way the virtual DOM works or disable it all together. For example tables with significantly varying row height, or very large data sets.

In these cases, have a read of the Virtual DOM Documentation to find out more.

Row Height

By default Tabulator will resize the height of a row to fit the contents of its cells. You can use the rowHeight option to force a height for all rows in the table. This should be set to an integer value in pixels.

var table = new Tabulator("#example-table", {
    rowHeight:40, //set rows to 40px height
});

Column Layout Modes

Layout mode functionality is provided by the layout module

You can choose how your table should layout its columns by setting the layout mode, in the configuration options:

var table = new Tabulator("#example-table", {
    layout:"fitData",
});

Tabulator has a number of different layout modes to choose from

Fit Columns to Data

By default Tabulator will use the fitData layout mode, which will resize the tables columns to fit the data held in each column, unless you specify a width or minWidth in the column constructor. If the width of all columns exceeds the width of the containing element, a scroll bar will appear.

var table = new Tabulator("#example-table", {
    layout:"fitData",
});

Fit Columns to Data and Fill

The fitDataFill layout mode functions in the same way as the fitData mode, but ensures that rows are always at least the full width of the table.

var table = new Tabulator("#example-table", {
    layout:"fitDataFill",
});

Fit Columns to Data and Stretch Last Column

The fitDataStretch layout mode functions in the same way as the fitDataFill mode, but instead of stretching the empty row to fill the table it stretches the last visible column.

var table = new Tabulator("#example-table", {
    layout:"fitDataStretch",
});

Fit Table and Columns to Data

The fitDataTable layout mode, will set the column widths in the same way as the fitData mode, but it will also then resize the width of the table to match the total width of the columns

var table = new Tabulator("#example-table", {
    layout:"fitDataTable",
});

Fit Columns to Table Width

As an alternative to the default data fit, you can use the fitColumns layout mode to cause Tabulator to resize columns so they fit perfectly in the available table width.

In this layout mode, columns without a width set are resized to fill any remaining space on the table. If all columns cannot fit on the table then a scrollbar will appear.

var table = new Tabulator("#example-table", {
    layout:"fitColumns",
});

You can adjust the behaviour of the layout using the widthGrow and widthShrink properties on a column definition

The widthGrow property should be used on columns without a width property set. The value is used to work out what fraction of the available will be allocated to the column. The value should be set to a number greater than 0, by default any columns with no width set have a widthGrow value of 1.

The widthGrow function works by dividing the available space by the sum total of widthGrow values and then allocating it out to the columns based on their value.

var table = new Tabulator("#example-table", {
    layout:"fitColumns",
    columns:[
        {title:"Name", field:"name", width:100}, //column has a fixed width of 100px;
        {title:"Age", field:"age", widthGrow:1}, //column will be allocated 1/5 of the remaining space
        {title:"Color", field:"color", widthGrow:3}, //column will be allocated 3/5 of the remaining space
        {title:"location", field:"location"}, // column has a default widthGrow of 1 and will be allocated 1/5 of the remaining space
    ]
});

The widthShrink property should be used on columns with a width property set. The value is used to work out how to shrink columns with a fixed width when the table is too narrow to fit in all the columns. The value should be set to a number greater than 0, by default columns with a width set have a widthShrink value of 0, meaning they will not be shrunk if the table gets too narrow, and may cause the horizontal scrollbar to appear.

The widthShrink function works by dividing the excess horizontal space by the sum total of widthShrink values and then allocating it out to the columns based on their value.

var table = new Tabulator("#example-table", {
    layout:"fitColumns",
    columns:[
        {title:"Name", field:"name", width:100}, //column will not be shrunk
        {title:"Age", field:"age", width:200, widthShrink:2}, //column will be shrunk by 2/3 of the excess space
        {title:"Color", field:"color", width:200, widthShrink:1}, //column will be shrunk by 1/3 of the excess space
        {title:"location", field:"location"}, //column has no width set so will be set at the tables minWidth value
    ]
});

Update Column Widths On New Data

To keep the layout of the columns consistent, once the column widths have been set on the first data load (either from the data property in the constructor or the setData function) they will not be changed when new data is loaded.

If you would prefer that the column widths adjust to the data each time you load it into the table you can set the layoutColumnsOnNewData property to true.

var table = new Tabulator("#example-table", {
    layoutColumnsOnNewData:true,
});

Responsive Layout

Responsive layout functionality is provided by the responsive layout module

Responsive layout will automatically hide/show columns to fit the width of the Tabulator element. This allows for clean rendering of tables on smaller mobile devices, showing important data while avoiding horizontal scroll bars. You can enable responsive layouts using the responsiveLayout option.

There are two responsive layout modes available:

hide - hide columns that no longer fit in the table
collapse - collapse columns that no longer fit on the table into a list under the row

var table = new Tabulator("#example-table", {
    responsiveLayout:"hide", // hide rows that no longer fit
});

Hide Extra Columns

By default, columns will be hidden from right to left as the width of the table decreases. You can choose exactly how columns are hidden using the responsive property in the column definition object.

When responsive layout is enabled, all columns are given a default responsive value of 1. The higher you set this value the sooner that column will be hidden as the table width decreases. If two columns have the same responsive value then they are hidden from right to left (as defined in the column definition array, ignoring user moving of the columns). If you set the value to 0 then the column will never be hidden regardless of how narrow the table gets.

var table = new Tabulator("#example-table", {
    responsiveLayout:true, // enable responsive layouts
    columns:[ //set column definitions for imported table data
        {title:"Name", field:"name", responsive:0}, // this column wil never be hidden
        {title:"Age", field:"age" , responsive:3}, // hidden first
        {title:"Gender", field:"gender" }, // hidden fifth
        {title:"Height", field:"height" , responsive:2}, // hidden third
        {title:"Favourite Color", field:"color" , responsive:2}, // hidden second
        {title:"Date of Birth", field:"dob" }, // hidden fourth
    ],
});

Note: If you are using the fitColumns feature, you will need to set a minWidth property on the columns you want to respond responsively to ensure they are hidden when necessary, otherwise Tabulator will keep on reducing the width of the columns instead.

Collapsed Extra Columns To List

If you set the responsiveLayout option to collapse the values from hidden columns will be displayed in a title/value list under the row.

var table = new Tabulator("#example-table", {
    responsiveLayout:"collapse", // collapse columns that no longer fit on the table into a list under the row
});

In this mode an object containing the title of each hidden column and its value is generated and then used to generate a list displayed in a div .tabulator-responsive-collapse under the row data.

The inbuilt collapse formatter creates a table to neatly display the hidden columns. If you would like to format the data in your own way you can use the responsiveLayoutCollapseFormatter, it takes an array of objects of the column titles and values as an argument and must return the HTML content of the div.

This function should return an empty string if there is no data to display.

var table = new Tabulator("#example-table", {
    responsiveLayoutCollapseFormatter:function(data){
        //data - an array of objects containing the column title and value for each cell
        var list = document.createElement("ul");

        data.forEach(function(col){
            let item = document.createElement("li");
            item.innerHTML = "<strong>" + col.title + "</strong> - " + col.value;
            list.appendChild(item);
        });

        return Object.keys(data).length ? list : "";
    }
});

The data argument is an array of objects of the column titles and values, it takes the following format:

[
    {
        title:"Name",
        value:"Steve Green",
    },
    {
        title:"Age",
        value:53,
    }
]

Collapsed List Column Formatting

By default any formatter set on the column is applied to the value that will appear in the list. while this works for most formatters it can cause issues with the progress formatter which relies on being inside a cell.

If you would like to disable column formatting in the collapsed list, you can use the responsiveLayoutCollapseUseFormatters option:

var table = new Tabulator("#example-table", {
    responsiveLayoutCollapseUseFormatters:false,
});

Dummy Cell Component
Because the collapsed data is not based in a cell, a dummy cell component is passed into the formatters to allow them to function as normal. This dummy component only has the getValue, getData, getElement, getRow and getColumn functions rather than the full set of component functions.

Collapsed List Show/Hide

If you would like your users to be able to interact with the list and hide/show it as needed you can add a column that uses the built-in responsiveCollapse formatter that provides a control for toggling the visibility of the collapsed list

{formatter:"responsiveCollapse", headerSort:false}

The column using this formatter will be automatically hidden when there are no collapsed columns to display.

Default List Visibility

Collapsed lists are displayed to the user by default, if you would prefer they start closed so the user can open them you can use the responsiveLayoutCollapseStartOpen option

var table = new Tabulator("#example-table", {
    responsiveLayoutCollapseStartOpen:false,
});

Text Direction

Tabulator supports both "Right to Left" and "Left To Right" text directions.

By default Tabulator will attempt determine the correct text direction for the table based on the direction CSS property inherited from its parent element.

If you want to force the direction of the table, you can use the textDirection setup option. This can take one of three string values:

auto - this will automatically detect text direction from the direction CSS property inherited from its parent element (default)
ltr - this will force the table into left to right layout mode
rtl - this will force the table into right to left layout mode

var table = new Tabulator("#example-table", {
    textDirection:"rtl", // force table into right to left text direction
});

Frozen Column Support
Frozen columns are currently not supported in RTL mode, this functionality will be coming in a future release

Resizable Elements

Table Resizing

Table resize functionality is provided by the resize table module

Tabulator will automatically attempt to redraw the data contained in the table if the containing element for the table is resized. To disable this functionality, set the autoResize property to false

var table = new Tabulator("#example-table", {
    autoResize:false, // prevent auto resizing of table
});

Note: Tabulator uses the ResizeObserver JavaScript API to watch for resizing of the table, at present this is only available on the Chrome browser in versions 64 and above. In browsers without this functionality, Tabulator will fallback to using the window resize event which will only be able to detect changes on the window size, not on the table element itself.

Resizable Rows

Resize rows functionality is provided by the resize rows module

You can allow the user to manually resize rows by dragging the top or bottom border of a row. To enable this functionality, set the resizableRows property to true

var table = new Tabulator("#example-table", {
    resizableRows:true, // this option takes a boolean value (default = false)
});

Resizable Columns

Resize columns functionality is provided by the resize columns module

You can allow users to manually resize columns by dragging the borders of the column in both the column headers and the cells of the column.

You can enable this functionality using the resizable option in each columns definition to choose where the resize handles are available. It supports four possible options:

true - enable column resizing from both cells and headers
"header" - enable column resizing from headers only
"cell" - enable column resizing from cells only
false - disable column resizing

var table = new Tabulator("#example-table", {
    columns:[
        {title:"Name", field:"name", resizable:true}
    ]
});

Note: If you double click on a resizable border it will resize the column to fit the data it contains.

Maintain Column Fit When Resizing

If the resizableColumnFit table definition option is set to true, then when you resize a column its neighbouring column has the opposite resize applied to keep to total width of columns the same.

var table = new Tabulator("#example-table", {
    resizableColumnFit:true, //maintain the fit of columns when resizing
    columns:[
        {title:"Name", field:"name", resizable:true}
    ]
});

Resize Overflow
It is worth noting that should the neighbouring column reach is max or min width while the reszie is occurring, that the next column over will then begin to resize in its place. If the resize runs out of columns then the total width of all the columns will change.

Minimum Column Width

It is possible to set a minimum column width to prevent resizing columns from becoming too small.

This can be set per column using the minWidth property on the column definition.

{title:"name", field:"name", minWidth:120} //set minimum column width to 120px

Maximum Column Width

It is possible to set a maximum column width to prevent resizing columns from becoming too wide.

This can be set per column using the maxWidth property on the column definition.

{title:"name", field:"name", maxWidth:200} //set maximum column width to 200px

If you have defined the max column width globally using the columnDefaults option, then you can disable it on a per column basis by passing the value false to the maxWidth option in the column definition.

var table = new Tabulator("#example-table", {
    columnDefaults:{
        maxWidth:300, //maximum column width of 300px for all columns
    },
    columns:[
        {title:"name", field:"name", maxWidth:false} //remove max width on this column
    ]
});

Wrap Column Header Title Text

By default Tabulator will try and keep column header titles on one line, truncating the text with ellipsis if it gets wider that the column.

If you would like to wrap the text instead then you will need to edit the CSS white-space value for the column headers and set it to normal.

.tabulator .tabulator-header .tabulator-col .tabulator-col-content .tabulator-col-title {
    white-space: normal;
}

Frozen Elements

Frozen Columns

Frozen column functionality is provided by the frozen columns module

You can freeze the position of columns on the left and right of the table using the frozen property in the column definition array. This will keep the column still when the table is scrolled horizontally.

var table = new Tabulator("#example-table", {
    [
        {title:"Name", field:"name", frozen:true}, //frozen column on left of table
        {title:"Age", field:"age"},
        {title:"Eye Colour", field:"eyes"},
        {title:"Height", field:"height", frozen:true}, //frozen column on right of table
    ]
});

You can freeze any number of columns on the left or right of the table, but they must be next to each other in the column definition array.

Tabulator builds the frozen columns by looking through the column definition array from both sides, building up the frozen columns as it see the frozen property. Once a non-frozen column is reached it stops building the frozen list for that side of the table.

Note: Frozen columns are locked in place and cannot be reordered by dragging and dropping the column header.

Note: At lease one column must not be frozen for the table to render correctly. If you want to freeze all your columns then you will achieve the same effect by not freezing any.

Frozen Column Groups

If you are using grouped columns, then you can freeze an entire group by using the frozen property in the parent group definition

var table = new Tabulator("#example-table", {
    columns:[
        {
            title:"Column Group",
            frozen:true,//frozen column group on left of table
            columns:[
                {title:"Name", field:"name"},
                {title:"Age", field:"age"},
            ]
        }
        {title:"Eye Colour", field:"eyes"},
        {title:"Height", field:"height", frozen:true}, //frozen column on right of table
    ]
});

Note: You cannot freeze individual columns in a column group, either the entire group is frozen or none of the columns are

Frozen Rows

Frozen row functionality is provided by the frozen rows module

Tabulator allows you to freeze rows at the top of the table, so that they remain in position as you vertically scroll the table.

There are several options for configuring how your rows are frozen.

Freeze a Fixed Number of Rows

If you set the frozenRows table setup option to an integer value then that many rows of data will be frozen at the top of the table. In the example below we will freeze the first two rows of data:

var table = new Tabulator("#example-table", {
    frozenRows:2, //freeze first two rows of data
});

Freeze Rows by Field Value

You can use a combination of the frozenRows and frozenRowsField table setup options to freeze rows based on the value of a particular field in their row data.

Define the field you want to look at in the frozenRowsField option (this defaults to "id" if not set) and then set an array of values to compare against in the frozenRows option.

In the example below we will freeze any rows with a color value of "red" or "green":

var table = new Tabulator("#example-table", {
    frozenRowsField:"color", //freeze first two rows of data
    frozenRows:["red", "green"], //freeze first two rows of data
});

Freeze Rows by Function

For more advanced usage cases where you may need some custom logic to decide which rows are frozen, you can pass a function to the frozenRows option. This function will be called on each row in the table, it will be passed the Row Component for the row as its first argument and should return true if the row is to be frozen:

var table = new Tabulator("#example-table", {
    frozenRows:function(row){
        return row.getData().name.length < 10 // freeze all rows with a name less than 10 characters long
    },
});

Freeze Rows Using The Component

You can freeze a row at the top of the table by calling the freeze function on the Row Component of any row. This will insert the row above the scrolling portion of the table in the table header.

row.freeze();

A frozen row can be unfrozen using the unfreeze function on the Row Component of any row. This will remove the row from the table header and re-insert it back in the table.

row.unfreeze();

Note: Freezing or unfreezing a row will redraw the table.

Redrawing the table

If the size of the element containing the Tabulator changes (and you are not able to use the in built auto-resize functionality) or you create a table before its containing element is visible, it will necessary to redraw the table to make sure the rows and columns render correctly.

This can be done by calling the redraw method. For example, to trigger a redraw whenever the viewport width is changed:

window.addEventListener('resize', function(){
    table.redraw();
});

The redraw function also has an optional boolean argument that when set to true triggers a full rerender of the table including all data on all rows.

window.addEventListener('resize', function(){
    table.redraw(true); //trigger full rerender including all data and rows
});

Virtual DOM

Tabulator renders its table using a Virtual DOM, this means that it only renders the rows you seen in the table (plus a few above and below the current view) and creates and destroys the rows as you scroll through the table.

This allows tabulator to handle thousands of rows with no overhead as it only processes the information it needs to display.

A detailed description of how the Virtual DOM works can be found in the Architecture Concepts Section

External Event Bindings: It is not possible to externally add event bindings to elements in the table because they are created and destroyed by Tabulator as needed. The good news is there are callbacks and options to register almost every binding through the setup options.

Standard DOM Exceptions

When pagination is enabled Tabulator will revert to using basic DOM rendering as it will only be displaying one page at a time. This will render all rows at once with no vertical scroll bar.

Render Buffer

The virtual DOM renders a number of rows above and below the visible rows to ensure a smooth scrolling experience. This buffer will be set at the current of the height of table so there is always and additional tables height worth of rows above and beyond the view.

In some situations, where you have a full screen table with a large number of columns, this can result in slow rendering performance in older browsers. In these situations it is possible to manually set the height of the buffer in pixels using the renderVerticalBuffer option. By setting this to a smaller number than the height you can reduce the number of rows that are rendered and increase the performance on older browsers.

var table = new Tabulator("#example-table", {
    renderVerticalBuffer:300, //set virtual DOM buffer to 300px
});

Note: The renderVerticalBuffer should only be used as a last resort, by default its value is automatically set by Tabulator to suit the size of the table, the default value should work for 99% of usage cases. If you are experiencing rendering issues it is likely that your table has changed sizes and the redraw function needs to be called (see below).

Redraw Management

By default Tabulator will redraw part of the table when changes are made to visible data (eg. adding rows, deleting rows, sorting, etc). When carrying out lots of actions in quick succession this can cause a degradation of table performance as the table is redrawn several times.

To get around this you can use the blockRedraw and restoreRedraw functions to temporarily disable all table redraw actions while you are manipulating the table data.

Start by calling the blockRedraw function, this will prevent actions from triggering an update of the Virtual DOM:

table.blockRedraw(); //block table redrawing

When you have completed your required actions, call the restoreRedraw function. This will restore automatic table redrawing and trigger an appropriate redraw if one was needed as a result of any actions that happened while the redraw was blocked.

table.restoreRedraw(); //restore table redrawing

Table Resizing While the table redraw has been disabled, resizing the tables containing element may result in visual corruption of the table until the restoreRedraw function is called

Redraw Block Duration It is recommended that you only block table redrawing for short durations while you are performing update actions. leaving the table redraw blocked for long periods of time may result in visual corruption of the table and a poor user experience.

Table Resizing

Changing Table Height

If you want to manually change the height of the table at any time, you can use the setHeight function, which will also redraw the virtual DOM if necessary.

table.setHeight(500); //set table height to 500px

Note: The setHeight function is not available in classic render mode

Resizing The Table

If the table element changes height or width at any point (for example the height is set at a percentage and the user resizes the window), or if the table data is set while the table element is hidden, Tabulator needs to be told that it should redraw its contents to fit its new size.

Tabulator uses the JavaScript Resize Observer functionality to do this automatically where possible, but this feature has yet to be implemented in all browsers. you can see a list of browser that support this functionality here.

If you want to use Tabulator on a browser that does not yet support resize observers, you will need to call the redraw function when resizing/showing your table to ensure that the virtual DOM updates to display the correct number of rows.

table.redraw();

Disabling the Virtual DOM

If you need to disable virtual rendering for any reason you can set the renderVertical option to "basic" to force basic rendering.

var table = new Tabulator("#example-table", {
    renderVertical:"basic", //disable virtual DOM rendering
});

Poor User Experience

Disabling the virtual DOM will render all rows at once with no vertical scroll bar, which could lead to very poor performance in the browser if you are loading a lot of rows into the table.

Without the Virtual DOM, the table may need to be completely redrawn when certain actions are performed (eg. sorting and filtering), this could lead to a poor user experience. It may take significant time to redraw all the rows in large tables, and may also result in the table changing height during the redraw, which could affect the scroll position of the browser.

Note: It is strongly recommended that you DO NOT disable the virtual DOM, this functionality is included to help legacy users and those with very specific usage cases

Horizontal Virtual DOM

Experimental Feature - This feature is still in the experimental phase. It is fully functional on static tables, but may become unstable with column manipulation (adding/removing/updating column definitions). Have a play and see if it works for you, any feedback would be great!

By default, tabulator will use the standard virtual DOM to ensure that the table can process any number of rows passed to it. This works well for most usage cases, but on tables with a large number of columns, the rendering time for each row can result in sluggish rendering and scroll performance.

To get round this Tabulator also has a horizontal virtual DOM that can be enabled in such circumstances. which generates only the visible columns for each row, improving row rendering performance.

The horizontal virtual DOM is disabled by default, if you want to enable it you can use the renderHorizontal option

var table = new Tabulator("#example-table", {
    renderHorizontal:"virtual", //enable horizontal virtual DOM
});

Compatibility

The horizontal virtual DOM is not compatible with other table features that also work to limit the number of scrollable columns. When these features are enabled, the horizontal virtual DOM will be automatically disabled. These features include:

The fitDataTable layout mode
Responsive Columns
Classic Render Mode

Row Formatters
Use of row formatters with the horizontal DOM is permitted if they only involve styling the row or its cells. Row formatters that manipulate the contents of the row element will likely malfunction when used with the horizontal virtual DOM

Frozen Columns
Use of frozen columns with the horizontal DOM is currently not supported. The horizontal virtual DOM will be automatically disabled if frozen columns are detected. This limitation will be removed in a future release

Column Calculations
Use of Column Calculations with the horizontal DOM is currently not supported. The horizontal virtual DOM will be automatically disabled if Column Calculations are detected. This limitation will be removed in a future release

RTL
Use of RTL text direction with the horizontal DOM is currently not supported. The horizontal virtual DOM will be automatically disabled if RTL detected. This limitation will be removed in a future release

Frozen Rows
The use of frozen rows is not currently supported. This limitation will be removed in a future release

Empty Table Placeholder

You can use the placeholder option to display a message to your users when the table has no data set. The function can either take a string to display or, the HTML or DOM Node to display in the empty table.

var table = new Tabulator("#example-table", {
    placeholder:"No Data Available", //display message to user on empty table
});

Table Footer

The footer element that the tables uses for holding pagination elements etc, is automatically generated by Tabulator.

If you want to use your own element for any reason, for example you want to add additional elements to the footer, you can use the footerElement option to pass either a CSS selector, a DOM node, or the HTML for the contents of footer element into the table.

var table = new Tabulator("#example-table", {
    footerElement:"<button>Custom Button</button>", //add a custom button to the footer element
});

Note: To ensure correct functioning of the table, it is recommended that you apply the tabulator-footer class to the footer element

Events

A range of events are available for tracking the progress of table rendering. See the Layout Events section for more information.

Version 6.3 Released!

Table Layout

Maximum Table Height

Minimum Table Height

Collapsed List Column Formatting

Collapsed List Show/Hide

Default List Visibility

Wrap Column Header Title Text

Frozen Column Groups

Freeze a Fixed Number of Rows

Freeze Rows by Field Value

Freeze Rows by Function

Freeze Rows Using The Component

Standard DOM Exceptions

Table Resizing

Changing Table Height

Resizing The Table

Poor User Experience

Compatibility